Spacers & Adapters

• Vehicle specific fitting kit, moulded perfectly to the vehicle's body (or rail) shape
• Easy and quick installation
• Cruz fitting kits will only work with Cruz roof bars

• Adds ~10 mm height for leveling or clearance with Quick Mount systems.
• Pair of spacers included for one crossbar setup.
• Compatible with Vortex bars and Quick Mount leg sets (RLT600/RCH/RCL).

The RLKS3 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar,

• Height Adjustment: Adds 18 mm to your rack mounting system.
• 2500-Series Compatible: Works with 2500 leg kit and Heavy Duty/Vortex bars.
• Complete Kit: Includes necessary spacer blocks and hardware.

• Height Adjustment: Adds 10 mm to your 2500 leg system.
• 2500-Series Compatible: Fits Heavy Duty & Vortex bars with 2500 legs.
• Complete Pair Kit: Two spacer blocks and bolts ready to install.

• 10 mm wedge pair corrects leg angle on uneven tracks
• Fits one bar setup via pair (two wedges)
• Compatible with Quick Mount RLT600 legs on tracks

• 5mm wedge pair levels Quick Mount legs on angled surfaces
• Pair suits one crossbar setup
• Compatible with RLT600 Quick Mount leg systems

• Adds ~25 mm height under one crossbar for clearance
• Pair of spacers fits one Vortex bar with Quick Mount legs
• Designed for use with RLT600, RCH and RCL leg systems

• Height Adjustment: Adds 20 mm to your Vortex bar mounting height.
• Quick Mount Compatible: Fits RLT600, RCH and RCL leg systems.
• Pair Kit: Includes two spacers—fits one roof-bar.

• Raises bar height by ~15 mm for clearance or leveling
• Pair of spacers fits one Vortex bar on Quick Mount system
• Compatible with RLT600, RCH & RCL legs

The RLKS4 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar,

• Raises Vortex bar height by 5 mm for levelling or clearance
• Pair of spacers fits one crossbar setup
• Stackable up to ~30 mm for flexible adjustment

• Raises one bracket pair by ~10 mm for correct alignment.
• Pair of spacers included for one bar installation.
• Compatible with Pioneer platforms and Quick Mount (RLT600) legs.

• Raises bar height by ~30 mm for clearance or leveling
• Pair of spacers for one bar installation
• Works with RLT600, RCH & RCL Quick Mount legs

• Raises one bar’s height by ~25 mm for clearance or leveling.
• Pair of spacers for a single bar installation.
• Works with Heavy Duty bars and Quick Mount legs (RLT600/RCH/RCL).

• Raises Heavy Duty bar height by 20mm for clearance or levelling
• Pair of spacers for one bar setup
• Compatible with RLT600, RCH, and RCL Quick Mount legs

• Raises Heavy Duty bar height by 15mm for clearance or levelling
• Pair of spacers for one crossbar setup
• Compatible with RLT600, RCH, and RCL Quick Mount legs

• Raises Heavy Duty bar height by 10 mm for clearance or levelling
• Pair of spacers for one crossbar setup
• Compatible with RLT600, RCH and RCL Quick Mount legs

• Adds 5 mm height for rack levelling or clearance
• Stackable spacers for flexible height adjustment
• Designed for Heavy Duty bars with Quick Mount legs

• High-skirt bracket pair for Quick Mount system
• Requires RLT600 Quick Mount leg assemblies
• Provides extra clearance for raised body channels

• Provides 7.5mm lift to level Yakima HD crossbars
• Ensures accurate alignment across multi-bar setups
• Includes two spacers (enough for one bar)

Backbone 8 Bolt Kit.

Adaptor kit to suit EGR RollTrac

The Vortex ROC25 Spacer (10mm) allows you to fit a Rhino-Rack Vortex Bar to the RLKVO leg. This kit fits 1 bar.

Rola Titan Tray Spare Parts - Curvature Adaptor Pair (25-0313)

• Bar conversion: Enables Euro Bar mounting to existing RLKVA legs.
• Complete hardware pack: Includes screws and channel nuts for install.
• System compatibility: Designed for Euro style bars and RLKVA leg packs.

The Vortex ROC25 Spacer (25mm) allows you to fit a Rhino-Rack Vortex Bar to the RLKVO leg. This kit fits 1 bar.

The Vortex ROC25 Spacer (15mm) allows you to fit a Rhino-Rack Vortex Bar to the RLKVO leg. This kit fits 1 bar.

Do you have a canopy that's higher than your cab? These height packers are ideal to level your Prorack HD crossbar across your vehicle or to just add some clearance to your existing crossbars. TP1 - set of 2 packers TP2 - set of 4 packers TP3 - set of 6 packers TP4 - set of 8 packers

4 pack of height packers compatible with Prorack Heavy Duty bars. Provides 15 mm extra height between vehicle roof and bottom of bar.

Increases height between your TrimHD crossbar and StreamLine legs. Handy for levelling bars on canopy and custom fits.

Works with LockNLoad bars to give an extra 30 mm height clearance.

Works with LockNLoad crossbar to give an extra 22.5mm height clearanceHeight packers used below fixed point and track legsPack of 6 to suit a single crossbar

• Adds ~15 mm height under one LockNLoad bar
• Four spacers included for one crossbar setup
• Levels rack height or increases gear clearance

• Adds ~7.5 mm clearance under one LockNLoad bar
• Supplied as a 2-pack for single crossbar adjustment
• Compatible with LockNLoad fixed-point & track leg systems

Provide extra height to your LockN'Load set up so that you can have leveled crossbar with vehicle cab and canopy.