Shingleback Off Road

• 4 Bike Vertical Hitch Bike Carrier
• 35kg rating per cradle (105 kg total across the rack)
• Front and rear wheel bungee loops
• Foot Latch Tilt Mechanism
• Australian Made

• 5 Bike Vertical Hitch Bike Carrier
• 23 kg rating per cradle (100 kg total across the rack)
• Front and rear wheel bungee loops
• Hitch Pin Tilt Mechanism
• Australian Made

If you have a 200 series Landcruiser you most likely have the factory fitted 50mm hitch receiver towbar which varies from other standard towbars.

The Shingleback Floor Stand gives you another space saving option to convert your Vertical Bike Rack into a super stable and strong storage solution that works well with the Shingleback Swing Arm.

• 6 Bike Vertical Hitch Bike Carrier
• 35kg rating per cradle (105 kg total across the rack)
• Front and rear wheel bungee loops
• Foot Latch Tilt Mechanism
• Australian Made

• 5 Bike Vertical Hitch Bike Carrier
• 35kg rating per cradle (105 kg total across the rack)
• Front and rear wheel bungee loops
• Foot Latch Tilt Mechanism
• Australian Made

• Extender - Adds length to your tow hitch with this extender from Shingleblack
• Durable - Advanced powder coating provides exceptional corrosion resistance
• Built Tough - Tested and ADR approved to tow up to 3500kg trailer and can handle up to 350kg vertical weight

• 3 Bike Vertical Hitch Bike Carrier
• 35kg rating per cradle
• Front and rear wheel bungee loops
• Foot Latch Tilt Mechanism
• Australian Made

• 2 Bike Vertical Hitch Bike Carrier
• 35kg rating per cradle
• Front and rear wheel bungee loops
• Foot Latch Tilt Mechanism
• Australian Made

This accessory is designed for dual purpose, for shorter wheel based bicycles such as kids 20” bikes, but also designed to carry super slack head angle long wheel base downhill bikes. A simple design which bolts into the bottom bar of the rack and can be flipped either way for your requirements. This accessory is only compatible with Sport and Boost racks.

The Standard Long tow bar tube is best suited to vehicles with long trays or canopies (for example). Shingleback strongly recommends that you use additional straps from the rack to your vehicle if choosing the long tow bar tube to reduce any additional movement.

The Standard Short tow bar tube has only one pin hole and will provide a closer fit to your vehicle without having a long section of the tow bar tube sticking out. Great for (standard SUV type vehicles) with the minimum 80mm depth.

An option for vehicles with a shallow hitch, ie. a Ford Ranger factory tow bar. The longer length allows the tailgate to be dropped with BOOST rack. It is recommended to use straps for additional support.

The Ranger Short tow bar tube has only one (hitch) pin hole and will provide a closer fit to your vehicle without having a long section of the tow bar tube sticking out.

Shingleback has designed a proprietary system only compatible with Shingleback Sport and Boost racks to transport 20” wheel BMX bikes. This accessory has also been developed to transport the little shredders with 20” MTB wheels and includes The Extender accessory.

The offset tow bar tubes are designed to allow a better fit for challenging vehicle setups and designs. The Offset tow bar tubes come in a variety of offsets and can be used to either raise or lower the height of your vehicle’s hitch.

The utility hook can be affixed to the cradles so that you can carry light items saving you car space; for instance ski poles, trail digging tools, a kid’s scooter etc. The items are easily attached using the Shingleback signature orange bungies. Items must be firmly attached and not exceed the width of the vehicle.

If you’re looking to carry multiple road-bikes side-by-side using our Roadie Inserts, you can use these Roadie Cradle Tilt Bars installed on alternate Cradles.

The Anti Rattle Bolt provides a rock solid fit to virtually eliminate any movement between the rack and vehicle tow hitch.

The offset tow bar tubes are designed to allow a better fit for challenging vehicle setups and designs.

The all new Shingleback Dolly Stand replaces the original much loved Trolley Stand as an even easier solution that still adds a second purpose to your Shingleback rack. Slot your rack into the Dolly Stand and it becomes a sturdy bike storage system for your shed or garage that keeps your bikes neat and out of harm’s way.

• 50mm Hitch offset adaptor to raise or lower the height of your vehicle's hitch
• Perfect for vehicles with rear mounted spare wheels such as Pajero
• Designed for use with Shingleback bike carriers

Anti-Rattle Clamp

• Versatile - Dual hitch design allows you to mount your bike carrier with a trailer attached to your hitch
• No Rattle - Designed to provide a rattle free fit, with optimised weight distribution
• Built Tough - Tested and ADR approved to tow up to 3500kg trailer and can handle up to 350kg vertical weight
• Durable - Advanced powder coating provides exceptional corrosion resistance

• Shingleback Speed Lock Pin
• PVC cover UV stabilized
• Lanyard material: SS304, total length: 250mm

• 5 Bike Vertical Hitch Bike Carrier
• 35kg rating per cradle (140 kg total across the rack)
• Front and rear wheel bungee loops
• Foot Latch Tilt Mechanism
• Australian Made

• World first Patent pending Lock Chock mechanism allows easy secure loading
• 190kg carrying capacity
• Only rack that combines motorbike and MTB
• Optional Jerry can mount
• Integrated ramp for convenience
• Comes with LED lights and numberplate board
• Used with our Dolly it doubles as storage and a work stand
• Australian made quality, built to last

• Versatile - Dual hitch design allows you to mount your bike carrier with a trailer attached to your hitch
• No Rattle - Designed to provide a rattle free fit, with optimised weight distribution
• Built Tough - Tested and ADR approved to tow up to 3500kg trailer and can handle up to 350kg vertical weight
• Durable - Advanced powder coating provides exceptional corrosion resistance

• 4 bike Vertical Hitch Bike Carrier
• 35kg rating per cradle
• Front and rear wheel bungee loops
• Foot Latch Tilt Mechanism
• Australian Made

Take your adventures to the next level with a Ski clamp designed to take up to 4 snowboards, Skis and water skis.

• 6 Bike Vertical Hitch Bike Carrier
• 35kg rating per cradle (140 kg total across the rack)
• Front and rear wheel bungee loops
• Foot Latch Tilt Mechanism
• Australian Made

Spare or replacement number plate holder for your Shingleback bike carrier.