Recovery Gear

The STOW iT Utility Holder (Large) has been designed to provide the most secure load carrying solution for a high lift jack, or any other item too long to place in the vehicle. This is the big brother to the popular Utility Holder (Regular) so it can carry more - two shovels, multiple fishing rods or a spade/axe combo. The STOW iT Utility Holder (large) is compatible with Rhino-Rack's most popular systems - the Pioneer Platforms, Reconn-Deck, Vortex & Heavy Duty Cross Bars.

Introducing the new Recovery Traction Board Holder, the perfect accessory for outdoor enthusiasts and off-road adventurers. The holder is designed to carry up to 4 recovery traction boards securely with a key lock mechanism. The holder is versatile and can be mounted horizontally or vertically on a Pioneer Platform, Reconn-Deck or Vortex Bars. Whether you're in the middle of a muddy trail or a sandy desert, you can quickly remove the boards from the holder and get back on track. In addition to recovery boards, the MSIT can safely hold your Aluminium folding ladder (RAFL).

• Designed specifically for mounting MAXTRAX recovery boards
• Includes four secure locking pins
• Compatible with Rhino-Rack Pioneer, Reconn-Deck, and various cross bar systems

• Square-mouth stainless steel blade with powder-coat finish
• Contoured, non-slip grip
• Designed for all-weather, off-road use

The Pioneer Recovery Track Side Bracket mounts Maxtrax Recovery Equipment at a 75 degree angle to all Rhino-Rack Pioneer systems. The engineering of this product allows you to free up space on the top of your Pioneer system for more adventure accessories.

The Recovery Track Straps are designed to be used with our recovery track bracket (#43159) to strap down any track of any brand. Made from polyester 25mm webbing, with a stainless steel ratchet buckle these straps are strong have have a lashing capacity o

Use these with the Pioneer Recovery Track Side Bracket (43159) to attach your Maxtrax Vehicle Recovery products to your Pioneer Platform or Tray.

Unique, moulded base plates attach straight to your roof rack or platform for a secure, space-saving way to carry MAXTRAX or TRED recovery tracks.

Our dependable new Recovery Track Mount is a smart, quick, secure way to keep recovery tracks on hand and within reach. Now you can deploy them whenever you need traction. Easy to install and use, this mount is designed to work with our Truck Collections HD Bars and SideBaralong with most other T-slot crossbars.

Mount your ARB compressor and switches neatly in the rear. Kaon’s bracket for Prado 150 & FJ Cruiser creates a secure, factory-style install without sacrificing cargo space.

• Maxtrax mounts designed to fit to the front of Rhino-Rack Pioneer Platform systems
• The 45º angle acts as a wind deflector reducing noise and potentially improving fuel efficiency with bulky rooftop gear
• Angled mounting creates a smaller footprint, saving valuable space on your roof rack for more equipment

They’re a saviour on tough tracks and sandy beaches, but there’s nothing worse than trying to find a spot to put filthy Maxtrax or TRED recovery boards after they’ve just saved your hide. The Cross Bar Recovery Board Mount enables safe and secure roof mounting on Cross Bar style roof racks, so they’re right where you need, when you need them most.

• Folding mount design reduces height to ~30 mm when boards removed.
• Fits 2 or 4 recovery boards on platform-style racks.
• Stainless steel build with matte black finish for durability and aesthetics.

• Adjustable mount for recovery boards on spare-tyre bracket systems.
• Side-mount offset design keeps boards flush with the vehicle body.
• “No Pins” option gives flexibility in locking-pin selection.

They’re a saviour on tough tracks and sandy beaches, but there’s nothing worse than trying to find a spot to put filthy recovery boards after they’ve just saved your hide. Flush Flat Maxtrax & TRED Mounting Brackets enable safe and secure roof mounting, so they’re right where you need, when you need them most.

Kaon designed their folding brackets so you can remove your Maxtrax or TRED recovery boards and simply fold down the mounting pins when they’re not in use. Better yet, the Stealth Mount brackets allow the pins to fold neatly flush with your rack, so when out of use it’s as though they aren’t there at all. For ARB BASE Rack they've created two options that secure to the rack's unique dovetail mounting system: both North-South (running front to rear) and East-West (running across the vehicle). So you can pick the perfect Stealth Mount to suit your setup.

Kaon designed their folding brackets so you can remove your Maxtrax or TRED recovery boards and simply fold down the mounting pins when they’re not in use. Better yet, the Stealth Mount brackets allow the pins to fold neatly flush with your rack, so when out of use it’s as though they aren’t there at all. For ARB BASE Rack they've created two options that secure to the rack's unique dovetail mounting system: both North-South (running front to rear) and East-West (running across the vehicle). So you can pick the perfect Stealth Mount to suit your setup.

• Fold out of sight: Mount pins fold flat so your rack stays clean and low when not used.
• Load smart: Secure boards safely and avoid moving mounts when switching gear.
• Low profile: 4 mm high when folded means less wind noise and fewer clearance worries.

• Flush-mount design keeps boards low and rack profile slim
• Heavy-duty stainless brackets work with MAXTRAX or TRED boards
• Compatible with major platform rack systems (Pioneer, LockNLoad, Slimsport etc)

TRED Owners, Kaonhear you! You like the KAON Recovery Board Mounts, but 10mm Maxtrax pins don’t quite work properly with TRED Boards, and the 6mm thread on TRED pins are just too small.

Positioned on the side of your roof rack, these mounting brackets keep your Maxtrax or TRED within easy reach and keep your roof rack free for all your gear.

Recovery Tow Points to suit Toyota HiLux N80 & Fortuner [Tanami Red]

Nothing beats a roof rack for storing your Maxtrax or TRED while on the road. But we know trying to fit within your garage clearance can be a challenge, and having to take off mounting brackets after every trip is a hassle!

• Made to secure into Maxtrax MKII, Mini, LITE and X-Series Boards.
• Injection-moulded in a red UV-stabillised TPE-Polyproylene-blend
• Gives you the leverage needed to easily turn Maxtrax Pins

• Securely carry Maxtrax LITE boards. Kaon’s Out-Back mount (mount only) integrates with the Out-Back system, giving you a strong, modular recovery board solution.

These off-road tough articulating brackets mount MAXTRAX, TRED Pro and other popular rescue devices with similar hole spacing off the side of the Front Runner Slimline II rack.

Secure 1 to 2 pairs of MAXTRAX, TRED Pro, and other popular brands of recovery devices, flush to a Front Runner Rack with this off-road tough mounting kit.

• Jacking base - Provides a secure base for jacking your vehicle on soft ground
• Seamless integration - Fits perfectly with Maxtrax recovery boards for easy storage and access
• Durable - Like all Maxtrax gear it's built as tough as they come to withstand years of off-road use

Wedgetail Winged recovery track bracket is designed to carry your recovery boards either North-South or East-West on the Wedgetail platform. Allowing for low and flat mounting of your recovery boards to reduce the vehicles overall height and wind drag. suitable for Maxtrax and current generation Treds that incorporate keyhole mounts. The Wing requires the mounting pins (not supplied in kit) to be purchased through either Tred or Maxtrax depending on the brand of boards you own.

Wedgetail Winged recovery track bracket is designed to carry your recovery boards off the Drivers or Passenger side of the platform. Allowing for a convenient mounting solution that doesn't take up space on the platform, saving room for your other gear. Suitable for Maxtrax and current generation Treds that incorporate keyhole mounts. The Wing requires the mounting pins (not supplied in kit) to be purchased through either Tred or Maxtrax depending on the brand of boards you own.

The TRED Quick Release Mounting Pins are designed to easily and securely mount your recovery boards to your vehicle, trailer or caravan. The unique design will mount up to four TRED GT, HD or Pro model recovery boards or two of the TRED 800/1100 model recovery boards while allowing the option of a padlock for added security.

By purchasing any of the TRED NBCF products, you’ll help fund projects that improve the longevity and quality of life for breast cancer patients.

When attached to TLRABB (Accessory Base Bracket), TLRRTA is designed to carry up to FOUR recovery tracks

MAXTRAX Indeflate Digital 2 hose

MAXTRAX Indeflate Digital 4 Hose

MAXTRAX is the lightweight, easy-to-use vehicle recovery and extraction device thats easily carried by almost anything with four-wheels ensuring an easy way out if your vehicle becomes stuck.